CHAPTER 405
JUNK DEALERS

Table of Contents

Sec. 21-11a. Requirements for scrap metal processors.
Sec. 21-14. Exemptions.

      Sec. 21-11a. Requirements for scrap metal processors. (a) A scrap metal processor, as defined in section 14-67w, shall not be required to segregate scrap metal it receives from other materials on its premises and hold the same for five days except for wire that could be used in the transmission of telecommunications or data unless purchased from (1) a person registered pursuant to section 29-402 to engage in the business of demolition of buildings, or (2) a person who has already segregated such scrap metal pursuant to this chapter and such person provides such scrap metal processor with a written statement affirming such segregation. Upon receipt of a load of scrap metal, such scrap metal processor shall take a photograph of the motor vehicle delivering such scrap metal, including the license plate of such vehicle, and such load of scrap metal. Upon receipt of wire that could be used in the transmission of telecommunications or data, such scrap metal processor shall make a copy of the certificate of registration of such person, record a description of the material received and record a statement as to the location from which the material came.

      (b) The scrap metal processor shall maintain the documents, photographs and other records required under subsection (a) of this section in good condition and shall retain such records for a period of not less than two years. Such records shall be open for inspection by law enforcement officials upon request during normal business hours.

      (P.A. 07-121, S. 2.)

(Return to
Chapter Table of Contents)
(Return to
List of Chapters)
(Return to
List of Titles)

      Sec. 21-14. Exemptions. The provisions of this chapter shall not apply to any dealer in motor vehicles, as defined in chapter 246, or any dealer in antique household furniture, china or glassware.

      (1949 Rev., S. 4652; 1967, P.A. 887, S. 1; P.A. 07-121, S. 1.)

      History: 1967 act exempted scrap metal processors; P.A. 07-121 deleted exemption for scrap metal processors and made a technical change.

(Return to
Chapter Table of Contents)
(Return to
List of Chapters)
(Return to
List of Titles)